hiwies asavecas / TECH TIPS Dixie Part Numbers: A-6369 A-80324 A-80336 Applications: 2005 — 2007 Land Rover LR3 (VIN 5A300360 — 7A449838) 2005 — 2007 Land Rover LR3 4.0L V6 (VIN 5A320935 — 7A4414191) 2006 — 2007 Land Rover Range Rover (VIN 6A900129 — 7A257088) 2006 — 2007 Land Rover Range Rover Sport (VIN 7A100001 — 7A129334) Condition: The operator of the vehicle may complain of a chirp noise when starting the engine from the accessory drive belt. Cause: A potential cause for the above condition is a manufacturing flaw in the idler pulley. Correction: The manufacturer has released an updated idler pulley and recommends replacing the belt at the same time. The parts that may require replacing are listed below: Application Description Part Number All Idler Pulley PQR500350 LR3, Range Rover Sport Belt PQR500330 LR3 4.0L V6 Belt PQS500081 Range Rover Belt PQR500320 Range Rover Sport (with Dynamic control) Belt PQR500340 Follow the manufacturer’s recommended procedures when diagnosing and repairing the above condition. REV: 20111129 Updated from 2010 version to inlude another revision to the belt on the 4.0L V6. REV: 201111129 Courtesy of APRA TSB_631 Dixie Tech Tips are intended for use by professional technicians, and are not for the general public. They are written to inform technicians of conditions that may exist or as a guide to aid in diagnosing and servicing a vehicle. All references to original equipment manufactures, vehicle manufactures and any other Trade Mark names are for the sole purpose of identifying the vehicle and or part that the Tech Tip applies to. This document is property of Dixie Electric Ltd. and is not to be copied or distributed with out written permission.