LEXIE } TECH TIPS Dixie Part Numbers: TBA Applications: 2010 Honda Accord 2 door (VIN 1HGCS1..AA003602 to VIN 1HGCS1..AA004331) 2010 Honda Accord 4 door (VIN 1HGCP2..AA037687 to VIN 1HGCP2..AA043947) 2010 Honda CR-V 2WD (VIN 5J6RE3..AL005827 to VIN 5J6RE3..AL006366) 2010 Honda CR-V 4WD(VIN 5J6RE4..AL011857 to VIN 5J6RE3..AL011916) Conditions: The operator of the vehicle may complain of the engine stalling and failing to restart or cranking without starting. Cause: A possible cause for the above conditions a loose wire connection in the C101 engine wiring harness. Correction: Follow the manufactures recommended diagnostic and repair procedures which include inspecting the VIN in the engine compartment, vehicles already inspected and repaired by the dealership network will have a punch mark above the first digit. REV: 20120319 Courtesy of APRA TSB_8091.docx Dixie Tech Tips are intended for use by professional technicians, and are not for the general public. They are written to inform technicians of conditions that may exist or as a guide to aid in diagnosing and servicing a vehicle. All references to original equipment manufactures, vehicle manufactures and any other Trade Mark names are for the sole purpose of identifying the vehicle and or part that the Tech Tip applies to. This document is property of Dixie Electric Ltd. and is not to be copied or distributed with out written permission.