ERA Office: Monday – Friday 9:00-5:00 CST

275 W. BROWN ST, UNION, MO 63084

636-584-7400

office@electricalrebuilders.org

ERA Tech Helpline: 636-584-TECH (8324)

chiwia . & | [| { 8 | anees / TECH TIPS Dixie Part Numbers: S-2057 S-2058 Applications: 1990 — 1991 Ford Explorer 4.0L 1990 — 1991 Ford Ranger 4.0L Condition: The operator of the vehicle may complain of one or more of the following conditions: e Rough idle e Poor starting e Failure to start Cause: A possible cause for the above conditions is a faulty ground at the electronic distributorless ignition system (EDIS). Correction: If the above conditions are observed, wiggle the EDIS module’s connector, which is found on the right radiator support to see if the condition changes. If the condition changes, examine the ground circuit wire and terminal. The wire will be black/light green for 1990 or black/white for 1991. If the terminal does not have a brass sleeve install the upgrade terminal (part number F1TZ14461-A) to provide the module with a proper, secure ground. Follow the manufacturer’s recommended procedures when installing the terminal. REV: 20100202 Courtesy of Dixie Technical Department TSB_255.doc Dixie Tech Tips are intended for use by professional technicians, and are not for the general public. They are written to inform technicians of conditions that may exist or as a guide to aid in diagnosing and servicing a vehicle. All references to original equipment manufactures, vehicle manufactures and any other Trade Mark names are for the sole purpose of identifying the vehicle and or part that the Tech Tip applies to. This document is property of Dixie Electric Ltd. and is not to be copied or distributed with out written permission.

File Type: pdf
File Size: 663 KB
Categories: dixie