LXE } TECH TIPS Dixie Part Numbers: S-8774 S-8775 S-8776 S-8777 Applications: 2002 Kia Optima Condition: The operator of the vehicle may complain of a crank but no start condition following an engine stall for no apparent reason. Cause: A potential cause for the above condition is a crankshaft position sensor that was not made to specifications. Epoxy used to encapsulate the sensor has been found to damage the circuit boards resulting in failure of the sensor. Correction: Follow the manufacturer’s recommended diagnostic and replacement procedures if required. REV: 20100310 Courtesy of APRA TSB_883.doc Dixie Tech Tips are intended for use by professional technicians, and are not for the general public. They are written to inform technicians of conditions that may exist or as a guide to aid in diagnosing and servicing a vehicle. All references to original equipment manufactures, vehicle manufactures and any other Trade Mark names are for the sole purpose of identifying the vehicle and or part that the Tech Tip applies to. This document is property of Dixie Electric Ltd. and is not to be copied or distributed with out written permission.