chiwia . & | [| { 8 | LD f TECH TIPS Dixie Part Numbers: A-9509 A-80211 A-80216 Applications: 2005 — 2008 Nissan Frontier 4.0L V6 (built prior to VIN 1N6AD 0(xxx)8C 437234) 2005 — 2008 Nissan Pathfinder 4.0L V6 (built prior to VIN 5N1AR 18(xx)8C 656034) 2005 — 2008 Nissan Xterra 4.0L V6 (built prior to VIN 5N1AN 0(xxx)8C 531034) Condition: The operator of the vehicle may complain of belt slippage (chirping or squealing) under one or both of the following conditions: e On start up in cold or damp conditions. e After driving for an extended time. Cause: A potential cause for the above condition is misalignment of the drive belt and accessories and tensioner. Correction: Inspect that the pulleys are correctly aligned. Adjust the position of the power steering pump if required. Note: The factory-supplied auto-tensioner may require replacing. The part number can be observed by using a mirror. If the part number is 11955-EA20A it does not necessarily require replacing, however; if the number on the auto-tensioner is 11955-EA200 it does require replacing. Follow the manufacturer’s recommended procedures and torque requirements when aligning the drive system components and replacing the auto-tensioner. REV: 20100416 Courtesy of APRA TSB_895.doc Dixie Tech Tips are intended for use by professional technicians, and are not for the general public. They are written to inform technicians of conditions that may exist or as a guide to aid in diagnosing and servicing a vehicle. All references to original equipment manufactures, vehicle manufactures and any other Trade Mark names are for the sole purpose of identifying the vehicle and or part that the Tech Tip applies to. This document is property of Dixie Electric Ltd. and is not to be copied or distributed with out written permission.