ERA Office: Monday – Friday 9:00-5:00 CST

275 W. BROWN ST, UNION, MO 63084

636-584-7400

office@electricalrebuilders.org

ERA Tech Helpline: 636-584-TECH (8324)

Max and Harold Stoehrer built the first one COLUMN BY RANDY RUNDLE wo brothers, Max and Harold Stoehrer of Methuem, Mass., spent two years developing a car they proudly named the Dodgem. Soon after the Dodgem was introduced to the public, the Scientific American magazine did a test on one of the cars. The review was less than flattering, stating that the cars were “highly unmanageable, with the steering only relative.’ The two brothers later admitted that with their cars, “until you have leamed how, you often try to go some- place, but often may not end up where you intended on going.” Nevertheless, the cars became extremely popular, despite their bad reviews. The success of the Dodgem cars caught the attention of Joseph Lusse and his brother Ray who together owned the Lusse Brothers Machine Shop Company. The Lusse brothers decided to design and build their own car and fix the defects in the design of the Dodgem cars. The brothers would spend the next nine years working on their car during which time they were awarded 11 patents. The Lusse brothers introduced their Auto-Skooter car to the public in the spring of 1930 and the cars were an immediate hit, in part because they had truly solved most all of the problems associated with the Dodgem cars. The Lusse Brothers Auto-Skooters quickly established themselves within the market and easily outsold the Dodgem cars. A 1940’s company advertisement for the Lusse Brothers Auto-Skooter pro- claimed that “Our cars are built to exact- ing Lusse standards, which means built-in quality and stamina to spare…” Among the improvements the Lusse Brothers perfected in 1928 was to mount the engine vertically in the front of the car. Power could then be transmitted through two couplings to a ring-and-pinion final drive that had a small wheel attached with the rim keyed to each end of the out- put shaft. This design was much like that used by BWM for the Isetta. From 1935 on the Lusse Brothers Auto-Skooter Company experienced strong growth and prosperity. A minor interruption during World War II only made the company more secure. Improve- ments continued including updated head lights, fiberglass bodies, and air-filled bumpers instead of solid rubber bumpers. By now, you have no doubt figured out that the “Auto Skooter’” and the “Dodgem” cars were bumper cars like the ones from the carnival. Now that you know the histo- ry of the cars, let’s look at how the rest of the ride worked. The cars were driven by an electric motor powered by a curve shaped piece of metal with a copper or brass metal lining called a “spoon.” The spoon is firmly attached the end of a wooden pole. These spoons provided electricity to the motor in the bumper car when they rubbed on the undemeath side of a series of chicken wire-looking metal grids located in the ceiling. How they work First up, the bumper cars need electric power to work. That makes it complicated because bumper cars are one of the few rides that are able to travel forward and backward, side to side, and in circles all at the same time, and are not attached to any controls directly run by the ride operator. The better the connection between the spoon and the grid the faster the car will go. A clean, shiny contact between the spoon and the grid is what made the fastest cars. Sometimes you would get a really slow car and the operator would have to take some steel wool and polish the topside of the spoon that had accumu- lated a corrosion film. That could turn a slow car into a fast car. The remaining electricity is discharged through the metal floor to ground. So, if there is electricity on the floor, why don’t you get shocked if you touch the metal floor while the ride is turned on? As we all know electricity can do work (turn a motor to power the bumper car for example) when the voltage goes from a higher voltage to a lower one. Most of the amperage, which is what does the work in this example, is used up by the bumper car’s electric motor, so what electricity that is left has no “potential” left. You might get a slight tickle but that is all. To make the bumper cars slide around more and to prevent them from getting too much traction and hitting too hard, pow- dered graphite was sprinkled on the floor. Growing up we seldom gave much thought to the fun things in life and how they worked. As we get older, we often wished we had paid more attention. The other option is to read about it in one of the best trade newspapers around. Randy Rundle is owner of Fifth Avenue Antique Auto Parts, Clay Center, Kan. ET RIE|

File Type: pdf
File Size: 1 MB
Categories: eren