Start/stop technology aids new fuel-saving systems By A/C Delco S° on the brake pedal, come to a complete stop, and the engine turns off, saving fuel and reducing emis- sions. Release the brake pedal and press the accelerator pedal, the engine starts again. It all happens seamlessly without interruption of any accessory opera- tions. Starter generator. A start/stop system that automatically turns off and restarts the engine when the vehicle is stopped can deliver a substan- tial improvement in fuel economy by simply reducing the amount of time the engine idles. Many vehicles with a start/ stop system are not full hybrid electric vehicles that have the added cost and com- plexity of powering a vehicle completely on battery power. These fuel-saving sys- tems are becoming more commonplace on new vehicles, such as the new 2012 Buick LaCrosse, which will have start/ stop technology as a standard feature on the base model. New eAssist system In addition to the 2012 Lacrosse, the 2012 Buick Regal also will offer a start/stop system. The new GM system is called eAssist™. The 2012 LaCrosse and Regal offer impressive 25 percent fuel economy gains over the 2011 models with- out eAssist. The start/stop feature of the system uses a state-of-the-art lithium-ion battery system and an electric induction starter generator. eAssist models feature: °A 2.4L Ecotec 4-cylinder engine mated to a Hydra-Matic 6T40 auto- matic transmission eA starter generator, or drive motor, mounted to the front of the engine in place of the alternator ¢ An air-cooled generator control mod- ule comprised of the eAssist power- train control module, 14 volt power module and drive motor control mod- ule ¢ A hybrid/EV battery pack that stores 115V DC in two lithium-ion battery sections ¢ Lightweight 17-inch alloy wheels and tires with lower rolling resistance ¢ Regenerative braking, which pro- vides up to 15 kW of electricity to charge the high-voltage battery ¢A driver-selectable, fuel economy- optimizing eco mode for the air con- ditioning system, which enables more frequent and longer-duration engine Auto Stop periods The liquid-cooled electric induction starter generator is a three phase AC induc- tion machine that serves as a 115-volt AC generator and is used to provide engine power assist as well as to start the engine when in Auto Stop mode. As a generator, it provides up to 15 kW of AC power to the drive motor control module. As a motor, the starter generator provides up to 11 kW of electric power assistance and engine starting. The starter generator is con- nected to the crankshaft pulley using a specially designed serpentine belt and drive belt tensioner. The eAssist generator control and bat- tery module assembly contains the high- voltage lithium-ion battery pack, the inte- grated power inverter and 14V power mod- ule. It is located in the forward area of the trunk compartment and weighs about 65 pounds (29 kg). An electric fan cools the generator control and battery module, draw- ing air from a vent located in the package tray, behind the rear seat. An auxiliary, electric-driven transmis- sion oil pump has been added to keep the transmission fluid flowing and clutches applied when the engine shuts down dur- ing an Auto Stop. Generator control and battery module assembly. Auto stop While driving, when the brake is applied and the vehicle comes to a com- plete stop, the engine will turn off, depend- ing on operating conditions. This is referred to as an Auto Stop (the tachome- ter gauge will read AUTO STOP). The engine restarts immediately when the brake pedal is released or the accelerator pedal is applied. The maximum Auto Stop time is two minutes under ideal condi- tions. There are several conditions that may cause the engine to remain running or restart when the vehicle is stopped. These include: ¢The engine, transmission or high- voltage battery has not reached oper- ating temperature ¢ The outside temperature is less than -4 degrees F (-20 degrees C) ¢ The shift lever is in any gear other than Drive (D) ¢The high-voltage battery state-of- charge is low ¢ The climate control system requires the engine to run based on the climate control or defog setting. Using the eco air conditioning mode will result in more frequent and longer Auto Stops ¢The Malfunction Indicator Lamp (MIL) is illuminated To view the parameter for an Auto Start, review the scan tool Hybrid Data list available in the engine control mod- ule. This list contains parameters that are directly related to the Auto Start/Stop fea- ture. Look for Eng Auto Start Reason. This parameter will list the last command that caused the Auto Start feature to engage. Electric boost The eAssist system also uses power