Bulletin FM73B FAIRBANKS-MORSE TYPE FM-J1 MAGNETOS ON FAIRBANKS-MORSE Z & ECLIPSE ENGINES Adoption on Z and ZC Engines Fairbanks-Morse production Z and ZC engines are fitted at the factory with the Type FM-J1 magnetos. A carefully planned type designation indicates the application of the magneto and simplifies service work. | _ Application” ae aeaoue ME.) ake Adapter Magneto Type HP) Replacements on Z and ZC Engines 1. To replace Fype FM-J1 magnetos as furnished on Z or ZC engines, an Sad identical unit may be ordered by the magneto type designation as stamped on the housing (or shown in the tabulation above). 2. To replace Types R and RV1 magnetos, the Type FM-J1A2 magneto is always furnished, but the gear or coupling nut must also be ordered according to the ea : ADAPTER PLATE B2561A Fig. 1 — Type FM-J1A2 Magneto FLANGE B256I fe ee ae R or RV1 Type R or RV1 *Neither gears nor impulse couplings are included with FM—J1A2 magnetos ordered to replace Types R or RV1. The drive equipment must be removed from the old magneto and fitted to the new unit except for the gear or coupling nut which must be replaced since the threading of the magneto shaft has been changed from 7/16″-20 to 3/8″-16. 3. To replace Bosch or Sumter magnetos, or battery ignition, on older Z engine models, reference should be made to Bulletins FMAD, FM5D, and FM6A, . The Type FM-J1A2 magneto is furnished in combination with necessary change- over parts at a special kit price. Replacements on Eclipse Engines The mountings of Type RS1, FM1B and FM-J1B2 magnetos as used on Fairbanks- Fig. 2 — Type FM-J1B2 Magneto Morse 2-23 HP Eclipse engines are identical, but the Type FM-J1B2 magneto re- places the RS1 and FM1B magnetos only when a new drive gear is also used. This is necessary because the keyway of the magneto shaft was changed 17732 in position and it is inadvisable to try to adapt the old RS1l or FMIB gear to the replacement magneto. Magneto drive gears furnished for service on the Eclipse engine have both old and new keyways cut – “A” for RS1 and FMLB mag- netos and “B” for FM-J1B2 magnetos. (See Impulse Coupling Repair Price List No. 9835A, page 24.) The serial numbers of the first Eclipse engines to use the Type FM-J1B2 magnetos are as follows: FLANGE C256l Hit & Miss – #808427 Gaso.Throt.Gov. — #812621 Kero.Throt.Gov. — #814579 Magneto to engine timing as described in Eclipse Instr. No. 2819A has not been changed provided the proper gear is used with each of the various magnetos. Cooperation with Fairbanks-—Morse Branches The information contained in this bulletin has been sent toeach Fairbanks- Morse Branch, advising them that magneto repairs and replacements for the Z, ZC and Eclipse engines are available through the Magneto Service Organization. Fig. 3 – Type FM-J1B2A (CW) Magneto ## Refer to Colum 3, Page 4, of Type FM-J1B2B (CCW) Magneto Bulletin FMg837F. FAIRBANKS, MORSE & CO. Magneto Sales BELOIT WISCONSIN Bulletin FM73B 336586-0847 06M-BDN August 22, 1947 hile sna File Section- FIELD CHANGEOVERS