Soldering The Old Fashioned Way BY RICHARD VENSEL hen the first starter was repaired many years ago, you can bet the stud and brushes were connected/soldered using a battery, a ground clamp and a carbon rod. 110V resistance power-supplies were not in use at this time. Did you know that you can solder, silver solder and de-solder today using this same method? Simply hook your heavy duty soldering handle up to a 6, 12 or 24 volt battery. It may sound very old fashioned, and it is, but it can save you a lot of money, and with the correct tooling, work very well. This method can also save time, up to 80% , over using a soldering gun or iron. You can even solder ground brushes to the end plate using this method. Battery voltage plays a big part in the success of this method. Old timers love this method and use it successfully today, but many who try this do not like it. Like everything else, practice is required, and trying other options like a 6V or 24V battery may make the difference. As Ohms Laws says, “The voltage makes a very big difference, and those who have given up after just trying a 12V battery, may have found success with a 6V or 24V battery … you can’t argue with Ohms Law.” Before I tell you the secret, I do have one warning: This process gets very hot very fast, and steps need to be taken to make sure that the heat is directed to the joint rather then up into the handle. When you step on the foot switch and see the steel turning red, your filler metal, silver solder or paste will melt, and you should let off of the foot switch. There is a good demonstration of this on my website in the Tech Tips From Dick Section. Go to www.venselenterprises.com and click on the “Tech Tips from Dick” button. A whole library of advice and information can be found there. More information can be found in my online catalog. Click the “Online Catalog” button, then the “Soldering/Welding” index button, and check out the demonstration on page 117. All you need to get started is: e« A 12V charged battery. Even a bad battery will work (see below) ¢ A soldering/welding handle with battery terminal ends. Even small attachments like the Triton Hot Lips will work. (See Figures 1-3 for samples of a single holder, double holder and silver soldering handle) «
File Type:
pdf
File Size:
1 MB
Categories:
eren