ELECTRICAL REBUILDER’S ASSOCIATION—Technical Document CS201403A www.electricalrebuilders.org Tech Tip Removing Delco-Remy Generator Bushings BY ERE STAFF he best tool to remove a Delco- Remy generator bushing is a simple 5/8-11 tap. It will remove the bushing faster than you can change grippers in your bushing puller. The tap will start easily into the soft bushing material, quickly cutting threads as it goes in. Once the tap bottoms out in the housing, it will push the bushing right out. a MS ae ae ee Figure 1—Start the tap square with SRE housing. Figure 3—A few more turn and the bushing is removed An ERA Publication. ©2014, Electrical Rebuilder’s Association. All rights reserved. No portion of the guide may be reproduced Page 1 in any way, or stored in any electronic retrieval system without the prior written consent of the Electrical Rebuilder’s Association.