ERA Office: Monday – Friday 9:00-5:00 CST

275 W. BROWN ST, UNION, MO 63084

636-584-7400

office@electricalrebuilders.org

ERA Tech Helpline: 636-584-TECH (8324)

FILE IN THE M DV , PTE@StONiTE SERVICE MANUAL TRACTION MOTOR SECTION ; (Issued 3-16-78) VOLTAGE 12 ROTATION Reversible BRUSHES 8 POLES 4 VENTILATED See Tabulation FRAME DIAMETER 6 1/2″ LUBRICATION No lubrication required on units that have sealed ball bearings. Open ball bearings should be packed 1/4 to 1/2 full with a medium grade ball bearing lubricant. FIELD RESISTANCE (77°F) Series Coils .0019 to .0021 ohms. Measure between terminals S-1 and S-2. ARMATURE TEST These armatures have equalizer connections on the commu- tator and cannot be tested on a growler for shorted windings. Test to light load specification. COMMUTATOR | Minimum diameter 2.75”, Replace armature when commu- tator has worn to this dimension. BRUSH REPLACEMENT Replace brushes when they have worn to a length of 9/16″! or less. SPRING TENSION 30 to 36 ounces with new brushes. Measure with a spring scale hooked under the brush spring at the brush. Pull the scale on a line opposite the line of force exerted by the brush spring and take the reading just as the spring leaves the brush. TEST CONNECTIONS CWDE Rotation CCWDE Rotation Connect F-1 or 8-1 to battery positive Connect F-1 or S-1 to battery positive Connect F-2 or 8-2 to A-1 Connect F-2 or S-2 to A-2 Connect A-2 to battery negative Connect A-1 to battery negative TEST SPECIFICATIONS (77°F.) Test in both directions of rotation. Terminal Maximum Torque Voltage Amperes RPM Ft. Lbs. No Load Test 6 63 2740 Min. 0 Light Load Test Il 132 2800-3110 2 Printed In U.S.A, Page 2, (IDV Continues) MA MPFESTOMTCE SENVICE MANUAL Unit Ventilated MDV-4001,A Yes MDV-4002 Yes MDV-4003 Yes MDV-4004,A Yes MDV-4005 Yes MDV-4006,A Yes MDV-~4006B No MDV-4007 Yes MDV-4008 Yes TERMINAL INSULATED BRUSH INSULATED BRUSH ARMATURE “ .. ’ setae VIEWED FROM COMMUTATOR END Internal Wiring Diagram Printed in U.S.A.

File Type: pdf
File Size: 1 MB
Categories: prestolite