ERA Office: Monday – Friday 9:00-5:00 CST

275 W. BROWN ST, UNION, MO 63084

636-584-7400

office@electricalrebuilders.org

ERA Tech Helpline: 636-584-TECH (8324)

yy Pprestom te. _Pump Motor PN _ SERVICE…) 2S INFORMATION reaved 3/16/78 | VOLTAGE See Tabulation ROTATION .CCWDE © BRUSHES 4 POLES” ~ 4 – _ VENTILATED See Tabulation . . FRAME DIAMETER – – 5″ LUBRICATION None required. Prelubricated and sealed ball — ‘bearings used at both ends of motor. ~ ao, ‘ BRUSH REPLACEMENT . . Replace brushes when they have worn to a length of 5/16″ or less. SPRING TENSION _ +32 to 40 ounces with new brushes. Measure with , ‘. a spring scale hooked under the brush spring at – ‘the brush. Pull the scale on a line opposite | the . ‘line of forcé exerted by the brush spring and take the reading just as the spring leaves the brush. , ; END PLAY . Adjust to .005″ minimum with thrust washers at oO o . « €.E. bearing. Refer to Parts & ‘Equipment List om Fock , >. for thrust washer package. — SHUNT WINDING CURRENT DRAW – (77 °F/25°C) 0.4 to 0.6 amperes at. 24 volts, TEST SPECIFICATIONS. ~~ (77°F /25° C). _ Terminal “Maximum Torque _ Voltage ° mp ere L _ No Load Test. 24 5 3000-” 300 -O- Stall Torque Test 12 125 – Q0- 7.5 oo Internal Unit : Voltage Ventileced wiring MHR-4001 35-48 So Figure | MHR-4002 36-48 Yas Figure | MHR-4003 36-48 No Figure 1 MHR- 4004 24-36-48 No Figure lL MHR-42005 36~48 No Figure 2 MHR-4006 36-48 Yes Figure 1 MHR- 4007 36-48 No Figure i MHR-4008 36-45 Yes Figure i File in the Punted US & 1-600 SERVICE MANUAL eis . f aajoters fa Png i} PETER MINAL SSMU NTO = “NA Kx . ; a : “WINDING. __ _-WINDING- “SHUNT WINDING ; Figure Lo . Figure 2 .

File Type: pdf
File Size: 1 MB
Categories: prestolite