mXe ) TECH TIPS Dixie Part Numbers: S-1519 Applications: 2007 Jeep Wrangler 3.8L Condition: The operator of vehicle may complain of one or more of the following vehicle conditions: e Extended cranking cycle e Multiple crank cycles prior to the engine starting Cause: A potential cause for the above conditions is an incorrectly positioned camshaft sensor resulting in the camshaft sensor being too close and/or coming in contact with the camshaft gear Correction: Follow the manufacturer’s recommended procedures to check and/or replace the cam shaft sensor. REV: 20090130 Courtesy of APRA TSB_135.doc Dixie Tech Tips are intended for use by professional technicians, and are not for the general public. They are written to inform technicians of conditions that may exist or as a guide to aid in diagnosing and servicing a vehicle. All references to original equipment manufactures, vehicle manufactures and any other Trade Mark names are for the sole purpose of identifying the vehicle and or part that the Tech Tip applies to. This document is property of Dixie Electric Ltd. and is not to be copied or distributed with out written permission.