chiwia . & | [| { 8 | oxen / TECH TIPS Dixie Part Numbers: A-80269 Applications: 2008 — 2009 Ford Focus Condition: The operator of the vehicle may complain that the malfunction indicator lamp comes on. The technician may observe several diagnostic codes stored in the system including P1701, P0456, P0111 and P1702. Cause: A potential cause for the above is the calibration file. Correction: If code P0456 is stored in the system perform an Evaporative Leak Test and repair any leaks prior to continuing. If there are no leaks update the Powertrain Control Module calibration file to 60.06 or higher. This file was not included in the 2009-3 DVD release of the updates. REV: 20091221 Courtesy of Dixie Technical Department TSB_239.doc Dixie Tech Tips are intended for use by professional technicians, and are not for the general public. They are written to inform technicians of conditions that may exist or as a guide to aid in diagnosing and servicing a vehicle. All references to original equipment manufactures, vehicle manufactures and any other Trade Mark names are for the sole purpose of identifying the vehicle and or part that the Tech Tip applies to. This document is property of Dixie Electric Ltd. and is not to be copied or distributed with out written permission.