chiwia . & | [| { 8 | LD f TECH TIPS Dixie Part Numbers: A-6366 A-6412 A-6423 A-6425 A-6426 A-6427 A-6546 S-2150 S-2151 S-6160 S-6194 S-6274 Applications: 2005 — 2006 Volvo S60 with a 2 in the 11″ digit of the VIN 2005 — 2006 Volvo $80 with a 1 in the 11 digit of the VIN 2005 — 2006 Volvo V70 with a 1 or 2 in the 11™ digit of the VIN 2005 — 2006 Volvo X70 with a 1 in the 11″ digit of the VIN 2005 — 2006 Volvo X90 with a 1 in the 11″ digit of the VIN In all cases the production date codes are from 200425 – 200540 Condition: The operator of the vehicle may complain of one or more of the following conditions: – the engine fails to start – the brake lights remain on – various warning lamps remain on – the headlights remain on, even with the key removed – various warning messages in the driver information display Cause: A potential cause for the above condition is an improperly installed seal at the central electric module where the wiring harness enters the plenum (box) containing the module. The improperly installed seal allows moisture to penetrate the plenum. Correction: The manufacturer made a running change to production. Follow the manufacturer’s recommended procedures for inspecting and repairing, and replacing the central electric module if required. REV: 20100617 Courtesy of APRA TSB_628.doc Dixie Tech Tips are intended for use by professional technicians, and are not for the general public. They are written to inform technicians of conditions that may exist or as a guide to aid in diagnosing and servicing a vehicle. All references to original equipment manufactures, vehicle manufactures and any other Trade Mark names are for the sole purpose of identifying the vehicle and or part that the Tech Tip applies to. This document is property of Dixie Electric Ltd. and is not to be copied or distributed with out written permission.