fode ) TECH TIPS Dixie Part Numbers: S-80029 and S-80030 Applications: 2003 — 2005 Nissan Altima V6 built prior to February 26, 2004 VIN number 1N4BL11E_5C 124304 2004 Nissan Maxima built prior to February 26, 2004 VIN number 1N4BA41E_4C 896500 2004 Nissan Quest built prior to March 1, 2004 VIN number 5N1BV28U_4N 350542 Condition: Operators of the vehicle may complain of hard starting when the engine is warm but starts with no trouble when the engine is cold. The malfunction indicator light and codes P0340/P03045 may also be present (but not necessarily). Cause: A potential cause for this condition is that the vehicle crank position sensors may be faulty. Correction: Refer to the table below for the manufacture’s recommended correction. Findings Recommended Action Parts Required Hard starting when hot and | Replace only bank 1 23731-6J906 diagnostic code P0340 camshaft sensor (Bank 1 CMP) Hard starting when hot and | Replace only bank 2 23731-AL616 diagnostic code P0345 camshaft sensor (Bank 2 CMP) Hard starting when hot and | Replace banks 1 and 2 23731-6J906 and diagnostic codes P0340 camshaft sensor (Bank 1 23731-AL616 and P3045 CMP and Bank 2 CMP) Hard starting when hot and | Replace only band 1 23731-6J906 and not diagnostic trouble camshaft sensor (Bank 1 23731-AL616 codes CMP) REV: 20090608 Courtesy of APRA TSB_823.doc Dixie Tech Tips are intended for use by professional technicians, and are not for the general public. They are written to inform technicians of conditions that may exist or as a guide to aid in diagnosing and servicing a vehicle. All references to original equipment manufactures, vehicle manufactures and any other Trade Mark names are for the sole purpose of identifying the vehicle and or part that the Tech Tip applies to. This document is property of Dixie Electric Ltd. and is not to be copied or distributed with out written permission.