chiwia . & | [| { 8 | LD f TECH TIPS Dixie Part Numbers: S-80366 Applications: 2008 — 2009 Chrysler 300, 300C and 300 Touring 2008 — 2009 Dodge Charger 2008 — 2009 Dodge Magnum 2009 Chrysler Challenger NOTE: In all applications this bulletin applies only to the 2.7L and 3.5L engines built before October 8, 2008 (MDH 0810xx) Condition: The operator of the vehicle may complain of the malfunction indicator light coming on. The technician will observe diagnostic trouble code P0339 — Crankshaft Position Sensor Intermittent, in addition there may be other codes such as P0300 Multiple Cylinder Misfire, P1128 or P1129 Closed Loop Fuelling Not Achieved (Bank 1 or 2). There may be damage to the flex plate or ring gear observed as well. Cause: A possible cause for the above conditions is an incorrectly adjusted crankshaft position sensor. Correction: Follow the manufacturer’s recommended procedures for installing a shim, part number 68061031AA, on the crankshaft position sensor. In addition inspect the flex plate for possible damage and replace it if required following the manufacturer’s recommended procedures. REV: 20100114 Courtesy of APRA TSB_863.doc Dixie Tech Tips are intended for use by professional technicians, and are not for the general public. They are written to inform technicians of conditions that may exist or as a guide to aid in diagnosing and servicing a vehicle. All references to original equipment manufactures, vehicle manufactures and any other Trade Mark names are for the sole purpose of identifying the vehicle and or part that the Tech Tip applies to. This document is property of Dixie Electric Ltd. and is not to be copied or distributed with out written permission.